Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving Brea, CA

Pressure Washing in Brea, CA

High-pressure cleaning for driveways, walkways, patios, pool decks and other hard surfaces, with the pressure matched to each surface. Typical cost $150-$600.

Grime, mildew and stains build up a little at a time until one day the outside of your property looks years older. Pressure Washing in Brea, CA brings it back, usually in a single visit.

Method and pressure

Pressure washCleaning method

When to book pressure washing

  • Driveway or walkways look dark, gray or streaky
  • Green or black growth in shaded areas and along edges
  • Slippery surfaces after rain
  • Oil, rust or tire marks you can't scrub out
  • You're getting ready to sell, seal or paint

Why it gets dirty

  • Dirt and pollen that settle into the pores of concrete
  • Mold, mildew and algae in damp, shaded spots
  • Oil and fluid drips from vehicles
  • Rust from sprinklers, furniture and fertilizer
  • Tire marks and general foot traffic

What you can do yourself

  • Sweep off leaves and loose debris so they don't stain
  • Blot fresh oil drips with cat litter or an absorbent right away
  • Point sprinklers away from walls and walkways to cut down on rust and hard-water stains
  • Rinse pollen off with a garden hose during heavy pollen season

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

Common mistakes to avoid

  • Etched lines and 'zebra stripes' from holding a narrow tip too close
  • Water forced into window frames, door sills and siding laps
  • Damaged plants and lawns from chemical runoff
  • Injuries: a zero-degree tip can cut skin, and wet surfaces are slippery

How we handle pressure washing

  1. Walk the property and note surfaces, stains and anything fragile
  2. Protect plants, outlets, lights and doors, and move small items
  3. Pre-treat organic growth and degrease oil spots
  4. Clean with the right pressure and a surface cleaner for even results
  5. Rinse, post-treat to slow regrowth, and walk the job with you

Pressure Washing cost in Brea, CA

$150-$600Typical range for a typical home's driveway, walkways and patio
1-4 hoursTypical time on site
Once a year for most homesRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Serving Brea, CA and nearby towns

Driveways and patios in California collect oil, dust and tire marks over the long dry season. Cleaning with a surface cleaner and controlling the wash water keeps it out of storm drains.

Some cities in California limit outdoor water use, including washing hard surfaces with a hose, especially during drought declarations. Pressure washers use far less water than an open garden hose, but rules vary, so it's worth checking your city's current restrictions. Wash water should also be kept out of storm drains.

We provide pressure washing across Brea (ZIP codes 92821, 92822 and 92823) and nearby towns including La Habra (2.8 mi), Placentia (3.5 mi), Fullerton (3.5 mi) and Rowland Heights (4.1 mi). Call (555) 010-0000 for a free quote in Brea.

Pressure Washing: frequently asked questions

How much does pressure washing cost in Brea, CA?

Pressure Washing typically costs $150-$600 for a typical home's driveway, walkways and patio, and usually takes 1-4 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for pressure washing?

Pressure Washing is usually done with pressure wash, with the pressure adjusted for each surface. Delicate surfaces nearby, such as siding, windows and plants, are protected or cleaned with lower pressure.

Is pressure washing safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule pressure washing?

Once a year for most homes. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Brea, CA

Sidewalk & Walkway Cleaning for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $100-$250

Commercial Pressure Washing for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $400-$2,000

Oil Stain Removal for Pavers

Pressure wash with a surface cleaner. Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them.

Typical $100-$300

Screen Enclosure & Lanai Cleaning

Cleaning pool cages, screen rooms and lanais, including the frame, screens and the deck below.

Typical $200-$500

House Washing for Stone & Stone Veneer

Low-pressure wash. Natural stone and manufactured stone veneer vary a lot.

Typical $300-$700

Exterior Mold & Mildew Removal for Vinyl Siding

Soft wash. Vinyl is the most common siding in the U.S.

Typical $250-$700

Gutter Brightening

Cleaning the outside face of gutters to remove the black 'tiger stripes' that ordinary washing leaves behind.

Typical $150-$400

Driveway Cleaning for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $150-$400

Pool Deck Cleaning for Exposed Aggregate

Moderate-pressure wash. Exposed aggregate concrete has stones showing at the surface.

Typical $200-$500

Patio Cleaning for Pavers

Pressure wash with a surface cleaner. Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them.

Typical $150-$400

Pre-Paint Washing for Wood Siding

Soft wash. Painted and stained wood siding grows mildew and loses its finish faster on the shaded and weather-facing sides.

Typical $250-$600

Efflorescence Removal for Pavers

Pressure wash with a surface cleaner. Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them.

Typical $200-$600

Ready for a cleaner home or business?

Get a free pressure washing quote in Brea, CA. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote